Specification of Partech 7300w² Monitor Murah
Partech 7300w2 Monitor for the WaterWatch2 Range
The standard specification monitor provides all the connections required for up to 2 sensors and the system can be
expanded by the use of expansion boxes to accommodate 16 parameters in any combination.
By allowing the user to connect a variety of sensors to just one monitor and with the option for a single MODBUS
or PROFIBUS output cable, the 7300w2 greatly reduces installation costs, setup complexity and equipment
configuration.
DO, MLSS & ORP or pH sensors in an aeration lane or Turbidity, pH & temperature at the final effluent point are
just 2 examples of where the 7300w2 can save a user over 60% compared with a separate monitor for each sensor.
The 7300w2 network can also be expanded so additional measurement points can be added at a later date.
In both terms of software and hardware, the 7300w2 has been designed with the user in mind:
● Easy to read LCD display, visible even in direct sunlight
● Large touch buttons with feedback for use with gloves
● Intuitive menu structure to allow for minimal training and setup
● Automatically registers and sets up sensors when connected
The 7300w2 contains an inbuilt trending display, customer configurable, that shows the last 24hours data for any
measurement point on an easy to navigate graph. This can also be downloaded for reporting purposes. An external
USB port and data logging function allows users to log and retrieve all stored data for a site in a standard .csv
format without the need for specialist SD cards or compatible hardware.
KEY FEATURES
- Multisensor
- Multiparameter
- Graphic Display with 24hr Trending
- Datalogging
- 4-20mA and Relay Outputs
- Modbus RTU/RS485 Communications
- Profibus DP Communications
- 90-264VAC or 9-36VDC Power Supply
COMPATIBLE SENSORS
TurbiTechw2 LA
TurbiTechw2 LS
TurbiTechw2 HR
TurbiTechw2 LR
OilTechw2 FLT
OxyTechw2 RDO Pro-X
OxyTechw2 GAL
WaterTechw² pH8000
WaterTechw² Redox8000
WaterTechw2 C4E
ColTechw2
UVT-LED
SoliTechw² IL
WaterTechw² TMP
Physical |
|---|
Dimensions (hxwxd) |
185 x 215 x 95 mm |
Weight |
1.4 kg |
Protection Class |
IP65 |
Enclosure Material |
ABS |
Cable Entry |
1x M20, 4x M16, 1x M12 |
Cable Core Size |
Max Conductor Size 2.5 mm² |
Electrical |
|
Power Supply |
100 to 240 VAC 50/60 Hz |
Power Rating |
30 W
If more than two TurbiTechw² Sensors are to be used than an external higher rated power may be necessary |
Environmental Data |
|
Operating/Storage Temperature |
-20 to 60ºC, 0-95% Relative Humidity, Non-Condensing |
Location |
Indoor/Outdoor |
User Interface |
|
Display |
Graphical LCD, Black on White, Transreflective |
Viewing Area |
78 x 59 mm |
Back Light |
On/Off/On after Keypress with user adjustable contract |
Membrane Keypad |
6 Key, pillow embossed, 20 mm diameter |
Inputs |
|---|
Sensor |
2x ModTechw², RS485 |
Auxilliary |
Additional input for ancilliary devices such as sample presence detectors. This connection can also be used for powering such devices |
Outputs |
|
Serial Communications |
Modbus RTU on RS485
Profibus DP via Interface Unit |
Analogue |
2x 4-20 mA, maximum load 750 ohm |
Relays |
3 |
Relay Type |
SPCO |
Relay Rating |
Max 2A @ 30VDC/230VAC |
Auxiliary Connections |
Configurable for Remote Input, Device Power |
Product Publication No. PPPAP/IT00002-18
SKU. 223160, 223161, 226974 & 226975
Marketing Division
CV. Putra Andalas Prima
Tel. (+62)-61 8836 9476
Fax. (+62)-61 8836 9476
Email. marketing@putraandalasprima.co.id
