Specification of X-RITE 361T Tabletop Transmission Densitometer Murah
DENSITY METER
361T Tabletop Transmission Densitometer
Measures density (up to 6.0D) and dot area. Used to linearize imagesetters, adjust exposure, perform processor quality control, verify duplicated or contacted films. UV mode measures film base fog and evaluates diazo films.
Convenient Operation:
The densitometer is easy to use.
Measurements are made on a push and read basis.
The display consists of large LED numerals, which can be read easily in bright or dim light.
Internal memory and the null button, allow the operator to make comparative density measurements across a piece of film.
Quality features include:
Lighted Table, simplifies location of image areas to measure
Simple calibration procedure.
Rugged construction. Proven oil field use.
The densitometer will remain in proper alignment even though it is picked up by the arm.
The Model 301 is U.L. listed and is shipped calibrated to standards traceable to the NBS.
This is the most widely accepted densitometer for industrial x-ray requirements.
Easy-to-Read Display: Large half-inch LED numeric display for easy reading and fewer errors.
Convenient Service; Modular construction allows rapid replacement of lamps and easy access to electronic circuits.
One Year Limited Warranty (bulb excluded).
Product Features:
Measuring area: 1mm, 2mm, 3mm apertures standard
Measures negative and positive percent dot area
Includes both Ortho and UV densitometer responses
Includes interface cable for transmitting dot area readings to computers
Specification:
Measuring Range
0 to >6.0D
0% to 100% (+/- dot)
Measuring Area
1mm, 2mm, and 3mm (0.5mm optional)
Repeatability
Ortho,Visual (2mm and 3mm aperture)
±0.01D (0.0D to 5.0D)
±2% (5.0D to 5.5D)
±3% (5.5D to 6.0D)
Ortho,Visual (1mm aperture):
±0.01D (0.0D to 4.5D)
±1% (4.5D to 5.0D)
UV (3mm aperture)
±0.01D (0.0D to 3.5D)
±1% (3.5D to 4.0D)
Linearity
Ortho,Visual (2mm and 3mm aperture)
±0.02D (0.0D to 5.0D)
±1% (5.0D to 5.5D)
±2% (5.5D to 6.0D)
Ortho,Visual (1mm aperture)
±0.02D (0.0D to 4.5D)
±1% (4.5D to 5.0D)
UV (3mm aperture)
±0.02D (0.0D to 3.5D)
±1% (3.5D to 4.0D)
Warm-Up Time
2 minutes
5 minutes (UV)
Zero Stability
±0.02D per 8 hours
Response
X-Rite Ortho
X-Rite UV
Measuring Length (Throat)
10.25 inches
